JLM Lubricants
  • Products
    • Diesel
    • Autogas
    • Petrol
    • Service
    • Oil
  • Application
    • Catalytic exhaust
    • Air intake
    • Engine
    • Fuel injector
    • Fuel tank
    • Exhaust
    • EGR
    • Particulate filter
    • Radiator
    • DPF Fluid reservoir
    • Turbo
    • Underbody
    • Valve
  • Problem solver
  • Additive Stories
    • Global
    • English (GB)
    • Nederlands
    • Deutch
    • Française
    • België
  • Where to buy?

New Product Alert! JLM Petrol E10 Fuel Treatment

The JLM E10 Fuel Treatment 
JLM Lubricants is proud to unveil the latest arrival to its family of quality additives. The E10 Fuel Treatment is an easy to use solution to resolve the issues that are caused by blending up to 10% ethanol with unleaded petrol.  

The environmental challenges 
While engines have evolved to produce lower carbon dioxide (CO2) emissions, so too has petrol. To replace a proportion of the fossil-fuel content with a renewable alternative, ethanol is added to a current EU maximum of 10% by volume. However, being a bio-fuel might fool you into thinking that ethanol is harmless. Sadly, it is not. 

Should your car be E10 incompatible, use E5 (or E0) instead. According to ADAC, a single tankful of E10 in an incompatible vehicle can cause serious, lasting damage. Corrosion is the main problem, with the ethanol munching through certain rubbers and metals, resulting in dangerous leaks, or expensive mechanical failure. 

Most post-2005 cars are Type Approved to run on E10 fuel, which became a mandatory requirement for new models sold in the EU from 2011. To check your car you can visit one of the online E10 Compatibility Checker websites. Yet, even if your car is E10 approved, do not expect it to be immune from other issues that ethanol introduces. This is where JLM's E10 Fuel Treatment proves its worth. 

A modern solution for a modern problem 
Carmakers claim that E10 petrol is harmless on approved vehicles. Yet, JLM Lubricants' research team found that official tests were conducted on new, or nearly new, vehicles using fresh fuel. 

JLM Lubricants' Managing Director, Gilbert Groot, advises that this is not representative of real life. Additionally, ethanol and petrol are not perfect bedfellows, as he explains: 
"Just as food goes stale over time, so too does ethanol. Additionally, unlike petrol, ethanol absorbs water. Once it can hold no more, the water/ethanol mix separates, causing a useless incombustible mixture to sink to the bottom of the fuel tank, leaving a low octane gasoline layer above it. JLM's E10 Fuel Treatment conditions the fuel to help slow this process, as well as boosting the octane rating to help compensate for the slight loss in fuel economy that results from ethanol-laced petrol."

While running an engine on this degraded fuel causes further issues, the ethanol content in fresh E10 petrol increases soot and lacquer deposits within the combustion chamber. JLM's E10 Fuel Treatment cleans these contaminations and prevents them from accumulating. A further preventative maintenance function forms a protective layer on valve stems and seats, compensating for ethanol's lack of lubrication quality, thus enhancing engine valve/guide life and reducing the risk of valve seat recession. 

Mr Groot concludes: 
"JLM Lubricants has always been an environmentally responsible company. While we welcome the use of E10 to drive-down road transport's CO2 emissions, E10 petrol risks undermining an engine's efficiency, ironically making it more polluting. With the latest JLM E10 Fuel Treatment, we feel that we have arrived at the optimum solution."

About JLM Lubricants
Established in 2010, based in the manufacturing powerhouse of The Netherlands, JLM Lubricants is a global brand that designs, develops and manufactures a wide range of premium products for the automotive industry. JLM products are primarily developed for the professional motor mechanic working in an increasingly diagnostics based environment.JLM Lubricants have distributors in more than 40 countries and rising.

The JLM team develop products that keep internal combustion engines in peak form. Their fuel additives have a dual capacity – preventative and problem solving; they maintain the lowest CO2 emissions possible and reduce or eliminate the need for repairs.

The JLM range includes innovatie GDI injector cleaners, Valve Saver products, DPF cleaners with cerium and platinum and the OEM standard JLM Advance engine oil.

Sign up for the newsletter

About JLM

  • About us
  • News
  • Magazine

Contact

02 9133 3855 sales@jlmlubricants.com.au

Follow us

  • youtube
  • facebook
  • instagram
  • linkedin
  • twitter

Are you interested in bringing JLM to your region or country?

Become a distributor
Disclaimer | Privacy | Cookie settings | Terms and Conditions

Copyright 2023 JLM Lubricants | Created by Reyez!

We use functional, analytical cookies and third-party cookies to ensure that this website functions optimally.

More explanation about cookies
Allow cookies

Cookies on this website

We place functional cookies in order for this website to function properly and analytical cookies with which we can measure the use of the website. These cookies do not use personal data. Give your consent below for cookies that do process personal data.

More explanation about cookies
I want video
This allows you to watch videos on this website and allows the placement of cookies by video platforms, these platforms can follow you and use your internet behavior for other purposes.
I want personalized advertisements
With this you receive personalized advertisements that are tailored to your internet behavior. Via these cookies your internet behavior can be followed by advertising networks.
jump to top