JLM Engine Oil Flush250ml / J04835
JLM Engine Oil Flush Pro cleans aged and dirty engines and engine oil quickly and effectively, improving engine performance and reducing fuel consumption.
- Fuel-saving effect
- Increase engine performance
- For petrol, diesel and LPG/CNG engines
- Cleans cylinder walls, pistons, rings, valves, lifters and the upper cylinder area
- Fast acting & gentle cleaning
The effective additives in JLM Engine Oil Flush Pro dissolve old oil remnants and accumulated dirt in the engine. Engine Oil Flush Pro cleans the lubrication system and essential components such as cylinder walls, pistons, piston rings, valves, valve guides and the combustion chamber.
The engine noise reduces because the moving parts of the engine are cleaned thoroughly. JLM Engine Oil Flush Pro is suitable for all diesel, petrol, LPG/CNG and stationary engines. In addition to cleaning, Engine Oil Flush Pro provides extra protection to the engine and internal components.
JLM Engine Oil Flush Pro can be mixed with all mineral, synthetic, monograde and multigrade oil types.
HOW TO USE
JLM Engine Oil Flush is an oil based product and is compatible with all mineral, semi synthetic and fully synthetic motor oils.
The JLM Oil Flush will eliminate gum, varnish and sludge and also remove other contamination like carbon deposits, soot and liquids (water and fuel residuals).
1. Add the contents of one bottle (250ml) to the engine oil (before the oil change!) when the engine is at operating temperature.
2. Let the engine run for 15 minutes. For a better cleaning result, vary the rpm at times within these 15 minutes.
3. Drain the oil from the crankcase
4. Replace the oil filter
5. Add the new engine oil according to the vehicle specification
One bottle of 250ml treats 4 to 6 liters of motor oil.
We use JLM Engine Oil Flush and JLM Diesel Extreme Clean to the fuel tank so the engine will run as efficiently as possible after the repair.