JLM Engine Oil Flush

The effective additives in JLM Engine Oil Flush Pro dissolve old oil remnants and accumulated dirt in the engine. Engine Oil Flush Pro cleans the lubrication system and essential components such as cylinder walls, pistons, piston rings, valves, valve guides and the combustion chamber.

The engine noise reduces because the moving parts of the engine are cleaned thoroughly. JLM Engine Oil Flush Pro is suitable for all diesel, petrol, LPG/CNG and stationary engines. In addition to cleaning, Engine Oil Flush Pro provides extra protection to the engine and internal components.

JLM Engine Oil Flush Pro can be mixed with all mineral, synthetic, monograde and multigrade oil types.

HOW TO USE

JLM Engine Oil Flush is an oil based product and is compatible with all mineral, semi synthetic and fully synthetic motor oils.
 
The JLM Oil Flush will eliminate gum, varnish and sludge and also remove other contamination like carbon deposits, soot and liquids (water and fuel residuals).

1. Add the contents of one bottle (250ml) to the engine oil (before the oil change!) when the engine is at operating temperature.
2. Let the engine run for 15 minutes. For a better cleaning result, vary the rpm at times within these 15 minutes.
3. Drain the oil from the crankcase
4. Replace the oil filter
5. Add the new engine oil according to the vehicle specification

Dosage
One bottle of 250ml treats 4 to 6 liters of motor oil.