JLM Lubricants

JLM 5W30 Premium Grade Performance Oil

JA05W3007012005

 / 5000ml

  • Low fuel consumption
  • Low ash (DPF)
  • Improved cold start
  • Extended service life
  • Low emissions
JLM 5W30 Premium Grade Performance Oil JA05W3007012005 JLM LUBRICANTS

Gasoline and diesel engines are getting smaller.  However, they are expected to have higher performance. Downsizing and optimizing internal combustion engines puts increasing demands on the used engine oil. Especially for these powerful but delicate engines, JLM has developed a 5W30 Premium Grade Performance Oil that helps to reduce engine wear and lower fuel consumption.

Product information

JLM Premium Grade Performance Oil with article number JA05W3007012005 is a universal, high-quality and fully synthetic motor oil with a naturally high and extremely stable viscosity index. Through the thoughtful use of advanced additives, JLM Premium Grade Performance Oil offers a wide range of unique properties and benefits.

The best thing about JLM engine oil is the way it protects the engine. Due to the high viscosity of JLM motor oil, it adheres very well to rotating and moving parts, which in turn ensures that these parts do not wear out so quickly.

Less wear and less fuel consumption
The next big advantage of a high viscosity is the fuel consumption. Thanks to the excellent adhesion properties, the oil film can be kept extremely thin. The carefully selected additives ensure high lubrication, so that there is hardly any resistance between the parts and the oil. The engine can run smoothly, keeping fuel consumption low.

The lubricating oil film prevents rotating metal parts in the engine from coming into direct contact with each other, helping to prevent wear. Optimum viscosity means the oil can be kept thin, which in turn reduces drag when starting a cold engine.  

JLM’s motor oil also offers excellent cooling properties, so that the engine continues to perform optimally at high temperatures and under extreme conditions. Moisture has no chance to affect parts and foam formation is prevented thanks to the extensive additive package.

Applications
There is a reduced chance of combustion residue build-up in the engine due to the amazing sealing properties of the oil. JLM engine oil cleans the engine optimally and reaches all parts that are needed.

JLM’s universal fuel-saving motor oil is particularly suitable for traditional and ultra-modern petrol engines, diesel engines and hybrids with and without a turbo. JLM motor oil meets the quality requirements of the most important car manufacturers and is therefore widely applicable.  

Performance level
ACEA C3, API SN
MB approval 229.51/229.52
Approved under VW 505.00/505.01
GM Dexos 2
BMW Longlife-04

JLM Lubricants

Great addition

"This is a great addition to the products in my workshop. We continuously see fantastic results in the recovery of emissions and engine performance, among other things."

- Paul Finn

JLM Lubricants

Skeptical

"I was very skeptical, but after using the product and starting my car, I couldn't believe my eyes ... the yellow light in my car was no longer on!"

- Kevin Kalo

JLM Fixing cars

Surprising­ly good

"I never thought that JLM would surprise me so much. It gets better and better every time. I will continue to use these products. The fantastic results speak for themselves. Keep up the great work."

- Andrew Watts

Favicon JLM Lubricants grey

Frequently
asked
questions

These are the most common questions we get from a potential distributor.

Can JLM Valve Saver Fluid be added to petrol?

Yes, no problem at all. In fact JLM Valve Saver Fluid is a very good and tested lead replacement additive. The treat rate is 1ml of Valve Saver Fluid for 1 liter of petrol fuel.

Is it OK to use the extreme and the DPF cleaner together. ?

No, this will not have a positive effect. In fact it may cause an adverse effect. And also the risk of overdosing! Never combine fuel additives

 

Will AdBlue Plus dissolve existing crystal infestation or is it more like a preventative product?

JLM’s AdBlue Plus additive cleans and prevents crystal formation in the AdBlue dosing system. It also conditions the AdBlue fluid for a longer time to ensure proper working of the AdBlue and SCR system. This helps prevent performance loss and the often-subsequent expensive repairs. It also reduces foaming at low temperatures

Is the JLM Engine Oil Flush safe for use with wet belt engines?

Our JLM OIL FLUSH is safe to use with ‘wet belts’ (TBIO). This is mainly because we use non solvent and premium pack of oil cleaning additives.

 

Does the Petrol Emissions Reduction Treatment also clean the catalytic convertor?

The catalytic converter is not a filter, it functions by converting harmful emission gases into less harmful gases. The filter can become contaminated if for example there has been an oil leak, and when this happens the filter needs to be replaced. There is no additive or chemical that will remove physical contamination from a catalytic.

Title

Go to Top